***** EXTERNAL email. Please be cautious and evaluate before you click on links, open attachments, or provide credentials. ***** NOTICE DATE: October 20, 2017 NOTICE TYPE: M-D092917-03 NPRR SHORT DESCRIPTION: Implementation Details for NPRR782 and NPRR840 INTENDED AUDIENCE: ERCOT Market Participants and Settlement Personnel DAYS AFFECTED: November 1, 2017 LONG DESCRIPTION: ERCOT will be implementing changes for Nodal Protocol Revision Request (NPRR) 782, Settlement of Infeasible Ancillary Services Due to Transmission Constraints, and NPRR840, Implementation of Infeasible Ancillary Service Protocol Revisions, on November 1, 2017. NPRR840 revises the definitions to remove the Resource level attribute from the Ancillary Service infeasible quantity bill determinants (RUINFQ, RDINFQ, RRINFQ and NSINFQ). New Settlement Calculations: The following section and charge types have been added with NPRR782: 6.7.2.1 Charges for Infeasible Ancillary Service Capacity Due to Transmission Constraints (1) A charge to each QSE with Ancillary Service Supply Responsibility that is deemed infeasible by ERCOT as a result of a transmission constraints, whether or not a SASM is executed, is calculated as follows: (a) For Reg-Up, if applicable: RUINFQAMT q = MCPCRU DAM * RUINFQ q (b) For Reg-Down, if applicable: RDINFQAMT q = MCPCRD DAM * RDINFQ q (c) For RRS, if applicable: RRINFQAMT q = MCPCRR DAM * RRINFQ q (d) For Non-Spin, if applicable: NSINFQAMT q = MCPCNS DAM * NSINFQ q Settlement calculation revisions: Adjustments to Section 6.7.4, Adjustments to Cost Allocations for Ancillary Services Procurement, have been made for the following: ********* Include the total infeasible quantity cost (RUINFQAMTTOT, RDINFQAMTTOT, RRINFQAMTTOT, NSINFQAMTTOT) in the calculation of the total cost for procuring each AS type (RUCOSTTOT, RDCOSTTOT, RRCOSTTOT, NSCOSTTOT) ********* Remove the replacement capacity (RURP, RDRP, RRRP, NSRP) from the calculation of the QSE's obligation amount (RUO, RDO, RRO, NSO) 6.7.4 Adjustments to Cost Allocations for Ancillary Services Procurement (1) Each QSE, for which ERCOT purchases Ancillary Service capacity in the DAM, a SASM, or an RSASM, is charged for the QSE's share of the net costs incurred for each service. (2) For Reg-Up, if applicable: (a) The net total costs for Reg-Up for a given Operating Hour is calculated as follows: RUCOSTTOT = (-1) * ((RTPCRUAMTTOT m) + PCRUAMTTOT + RUFQAMTTOT + RUINFQAMTTOT) Where: Total charge of infeasible Ancillary Service Supply Responsibility for Reg-Up: RUINFQAMTTOT = RUINFQAMT q (b) Each QSE's share of the net total costs for Reg-Up for the Operating Hour is calculated as follows: RUCOST q = RUPR * RUQ q Where: RUPR = RUCOSTTOT / RUQTOT RUQTOT = RUQ q RUQ q = RUO q - SARUQ q RUO q = (SARUQ q + (RTPCRU q, m) + PCRU q - RUFQ q - RRUFQ q) * HLRS q SARUQ q = DASARUQ q + RTSARUQ q (3) For Reg-Down, if applicable: (a) The net total costs for Reg-Down for a given Operating Hour is calculated as follows: RDCOSTTOT = (-1) * ((RTPCRDAMTTOT m) + PCRDAMTTOT + RDFQAMTTOT + RDINFQAMTTOT) Where: Total charge of infeasible Ancillary Service Supply Responsibility for Reg-Down: RDINFQAMTTOT = RDINFQAMT q (b) Each QSE's share of the net total costs for Reg-Down for the Operating Hour is calculated as follows: RDCOST q = RDPR * RDQ q Where: RDPR = RDCOSTTOT / RDQTOT RDQTOT = RDQ q RDQ q = RDO q - SARDQ q RDO q = (SARDQ q + (RTPCRD q, m) + PCRD q - RDFQ q - RRDFQ q) * HLRS q SARDQ q = DASARDQ q + RTSARDQ q (4) For RRS, if applicable: (a) The net total costs for RRS for a given Operating Hour is calculated as follows: RRCOSTTOT = (-1) * ((RTPCRRAMTTOT m) + PCRRAMTTOT + RRFQAMTTOT + RRINFQAMTTOT) Where: Total charge of infeasible Ancillary Service Supply Responsibility for RRS: RRINFQAMTTOT = RRINFQAMT q (b) Each QSE's share of the net total costs for RRS for the Operating Hour is calculated as follows: RRCOST q = RRPR * RRQ q Where: RRPR = RRCOSTTOT / RRQTOT RRQTOT = RRQ q RRQ q = RRO q - SARRQ q RRO q = (SARRQq + (RTPCRR q, m) + PCRR q - RRFQ q - RRRFQ q) * HLRS q SARRQ q = DASARRQ q + RTSARRQ q (5) For Non-Spin, if applicable: (a) The net total costs for Non-Spin for a given Operating Hour is calculated as follows: NSCOSTTOT = (-1) * ((RTPCNSAMTTOT m) + PCNSAMTTOT + NSFQAMTTOT + NSINFQAMTTOT) Where: Total charge of infeasible Ancillary Service Supply Responsibility for Non-Spin: NSINFQAMTTOT = NSINFQAMT q (b) Each QSE's share of the net total costs for Non-Spin for the Operating Hour is calculated as follows: NSCOST q = NSPR * NSQ q Where: NSPR = NSCOSTTOT / NSQTOT NSQTOT = NSQ q NSQ q = NSO q - SANSQ q NSO q = (SANSQ q + (RTPCNS q, m) + PCNS q - NSFQ q - RNSFQ q) * HLRS q SANSQ q = DASANSQ q + RTSANSQ q New Settlement Bill Determinants: Bill Determinant Short Description Extract Extract Table RUINFQ q Reg-Up Infeasible Quantity per QSE PRDE RTM CODE BILLDETERMINANT MKTINPUTHEADER MKTINPUTINTERVAL RUINFQAMT q Reg-Up Infeasible Quantity Amount per QSE PRDE RTM CODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL RUINFQAMTTOT Reg-Up Infeasible Quantity Amount Total PRDE RTM MODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL RDINFQ q Reg-Down Infeasible Quantity per QSE PRDE RTM CODE BILLDETERMINANT MKTINPUTHEADER MKTINPUTINTERVAL RDINFQAMT q Reg-Down Infeasible Quantity Amount per QSE PRDE RTM CODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL RDINFQAMTTOT Reg-Down Infeasible Quantity Amount Total PRDE RTM MODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL RRINFQ q Responsive Reserve Service Infeasible Quantity per QSE PRDE RTM CODE BILLDETERMINANT MKTINPUTHEADER MKTINPUTINTERVAL RRINFQAMT q Responsive Reserve Service Infeasible Quantity Amount per QSE PRDE RTM CODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL RRINFQAMTTOT Responsive Reserve Service Infeasible Quantity Amount Total PRDE RTM MODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL NSINFQ q Non-Spin Infeasible Quantity per QSE PRDE RTM CODE BILLDETERMINANT MKTINPUTHEADER MKTINPUTINTERVAL NSINFQAMT q Non-Spin Infeasible Quantity Amount per QSE PRDE RTM CODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL NSINFQAMTTOT Non-Spin Infeasible Quantity Amount Total PRDE RTM MODE BILLDETERMINANT RTMOUTPUTHEADER RTMOUTPUTINTERVAL ACTION REQUIRED: Implement changes to shadow Settlement systems for NPRR782. ADDITIONAL INFORMATION: Pursuant to Nodal Protocol Section 21.6, Nodal Protocol Revision Implementation, ERCOT is required to provide notice as soon as practicable, but no later than ten days prior to implementation. NPRR782<http://www.ercot.com/mktrules/issues/NPRR782> and NPRR840<http://www.ercot.com/mktrules/issues/NPRR840> and associated documents can be found on the ERCOT website. CONTACT: If you have any questions, please contact your ERCOT Account Manager. You may also call the general ERCOT Client Services phone number at (512) 248-3900 or contact ERCOT Client Services via email at [log in to unmask]<mailto:[log in to unmask]>. If you are receiving email from an ERCOT distribution list that you no longer wish to receive, please follow this link in order to unsubscribe from this list: http://lists.ercot.com. sa