***** EXTERNAL email. Please be cautious and evaluate before you click on links, open attachments, or provide credentials. *****
NOTICE DATE: October 20, 2017
NOTICE TYPE: M-D092917-03 NPRR
SHORT DESCRIPTION: Implementation Details for NPRR782 and NPRR840
INTENDED AUDIENCE: ERCOT Market Participants and Settlement Personnel
DAYS AFFECTED: November 1, 2017
LONG DESCRIPTION: ERCOT will be implementing changes for Nodal Protocol Revision Request (NPRR) 782, Settlement of Infeasible Ancillary Services Due to Transmission Constraints, and NPRR840, Implementation of Infeasible Ancillary Service Protocol Revisions, on November 1, 2017.
NPRR840 revises the definitions to remove the Resource level attribute from the Ancillary Service infeasible quantity bill determinants (RUINFQ, RDINFQ, RRINFQ and NSINFQ).
New Settlement Calculations:
The following section and charge types have been added with NPRR782:
6.7.2.1 Charges for Infeasible Ancillary Service Capacity Due to Transmission Constraints
(1) A charge to each QSE with Ancillary Service Supply Responsibility that is deemed infeasible by ERCOT as a result of a transmission constraints, whether or not a SASM is executed, is calculated as follows:
(a) For Reg-Up, if applicable:
RUINFQAMT q = MCPCRU DAM * RUINFQ q
(b) For Reg-Down, if applicable:
RDINFQAMT q = MCPCRD DAM * RDINFQ q
(c) For RRS, if applicable:
RRINFQAMT q = MCPCRR DAM * RRINFQ q
(d) For Non-Spin, if applicable:
NSINFQAMT q = MCPCNS DAM * NSINFQ q
Settlement calculation revisions:
Adjustments to Section 6.7.4, Adjustments to Cost Allocations for Ancillary Services Procurement, have been made for the following:
********* Include the total infeasible quantity cost (RUINFQAMTTOT, RDINFQAMTTOT, RRINFQAMTTOT, NSINFQAMTTOT) in the calculation of the total cost for procuring each AS type (RUCOSTTOT, RDCOSTTOT, RRCOSTTOT, NSCOSTTOT)
********* Remove the replacement capacity (RURP, RDRP, RRRP, NSRP) from the calculation of the QSE's obligation amount (RUO, RDO, RRO, NSO)
6.7.4 Adjustments to Cost Allocations for Ancillary Services Procurement
(1) Each QSE, for which ERCOT purchases Ancillary Service capacity in the DAM, a SASM, or an RSASM, is charged for the QSE's share of the net costs incurred for each service.
(2) For Reg-Up, if applicable:
(a) The net total costs for Reg-Up for a given Operating Hour is calculated as follows:
RUCOSTTOT = (-1) * ((RTPCRUAMTTOT m) + PCRUAMTTOT + RUFQAMTTOT +
RUINFQAMTTOT)
Where:
Total charge of infeasible Ancillary Service Supply Responsibility for Reg-Up:
RUINFQAMTTOT = RUINFQAMT q
(b) Each QSE's share of the net total costs for Reg-Up for the Operating Hour is calculated as follows:
RUCOST q = RUPR * RUQ q
Where:
RUPR = RUCOSTTOT / RUQTOT
RUQTOT = RUQ q
RUQ q = RUO q - SARUQ q
RUO q = (SARUQ q + (RTPCRU q, m) + PCRU q -
RUFQ q - RRUFQ q) * HLRS q
SARUQ q = DASARUQ q + RTSARUQ q
(3) For Reg-Down, if applicable:
(a) The net total costs for Reg-Down for a given Operating Hour is calculated as follows:
RDCOSTTOT = (-1) * ((RTPCRDAMTTOT m) + PCRDAMTTOT + RDFQAMTTOT +
RDINFQAMTTOT)
Where:
Total charge of infeasible Ancillary Service Supply Responsibility for Reg-Down:
RDINFQAMTTOT = RDINFQAMT q
(b) Each QSE's share of the net total costs for Reg-Down for the Operating Hour is calculated as follows:
RDCOST q = RDPR * RDQ q
Where:
RDPR = RDCOSTTOT / RDQTOT
RDQTOT = RDQ q
RDQ q = RDO q - SARDQ q
RDO q = (SARDQ q + (RTPCRD q, m) + PCRD q -
RDFQ q - RRDFQ q) * HLRS q
SARDQ q = DASARDQ q + RTSARDQ q
(4) For RRS, if applicable:
(a) The net total costs for RRS for a given Operating Hour is calculated as follows:
RRCOSTTOT = (-1) * ((RTPCRRAMTTOT m) + PCRRAMTTOT + RRFQAMTTOT +
RRINFQAMTTOT)
Where:
Total charge of infeasible Ancillary Service Supply Responsibility for RRS:
RRINFQAMTTOT = RRINFQAMT q
(b) Each QSE's share of the net total costs for RRS for the Operating Hour is calculated as follows:
RRCOST q = RRPR * RRQ q
Where:
RRPR = RRCOSTTOT / RRQTOT
RRQTOT = RRQ q
RRQ q = RRO q - SARRQ q
RRO q = (SARRQq + (RTPCRR q, m) + PCRR q -
RRFQ q - RRRFQ q) * HLRS q
SARRQ q = DASARRQ q + RTSARRQ q
(5) For Non-Spin, if applicable:
(a) The net total costs for Non-Spin for a given Operating Hour is calculated as follows:
NSCOSTTOT = (-1) * ((RTPCNSAMTTOT m) + PCNSAMTTOT + NSFQAMTTOT +
NSINFQAMTTOT)
Where:
Total charge of infeasible Ancillary Service Supply Responsibility for Non-Spin:
NSINFQAMTTOT = NSINFQAMT q
(b) Each QSE's share of the net total costs for Non-Spin for the Operating Hour is calculated as follows:
NSCOST q = NSPR * NSQ q
Where:
NSPR = NSCOSTTOT / NSQTOT
NSQTOT = NSQ q
NSQ q = NSO q - SANSQ q
NSO q = (SANSQ q + (RTPCNS q, m) + PCNS q -
NSFQ q - RNSFQ q) * HLRS q
SANSQ q = DASANSQ q + RTSANSQ q
New Settlement Bill Determinants:
Bill Determinant
Short Description
Extract
Extract Table
RUINFQ q
Reg-Up Infeasible Quantity per QSE
PRDE
RTM CODE
BILLDETERMINANT
MKTINPUTHEADER MKTINPUTINTERVAL
RUINFQAMT q
Reg-Up Infeasible Quantity Amount per QSE
PRDE
RTM CODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
RUINFQAMTTOT
Reg-Up Infeasible Quantity Amount Total
PRDE
RTM MODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
RDINFQ q
Reg-Down Infeasible Quantity per QSE
PRDE
RTM CODE
BILLDETERMINANT
MKTINPUTHEADER MKTINPUTINTERVAL
RDINFQAMT q
Reg-Down Infeasible Quantity Amount per QSE
PRDE
RTM CODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
RDINFQAMTTOT
Reg-Down Infeasible Quantity Amount Total
PRDE
RTM MODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
RRINFQ q
Responsive Reserve Service Infeasible Quantity per QSE
PRDE
RTM CODE
BILLDETERMINANT
MKTINPUTHEADER MKTINPUTINTERVAL
RRINFQAMT q
Responsive Reserve Service Infeasible Quantity Amount per QSE
PRDE
RTM CODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
RRINFQAMTTOT
Responsive Reserve Service Infeasible Quantity Amount Total
PRDE
RTM MODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
NSINFQ q
Non-Spin Infeasible Quantity per QSE
PRDE
RTM CODE
BILLDETERMINANT
MKTINPUTHEADER MKTINPUTINTERVAL
NSINFQAMT q
Non-Spin Infeasible Quantity Amount per QSE
PRDE
RTM CODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
NSINFQAMTTOT
Non-Spin Infeasible Quantity Amount Total
PRDE
RTM MODE
BILLDETERMINANT
RTMOUTPUTHEADER RTMOUTPUTINTERVAL
ACTION REQUIRED: Implement changes to shadow Settlement systems for NPRR782.
ADDITIONAL INFORMATION: Pursuant to Nodal Protocol Section 21.6, Nodal Protocol Revision Implementation, ERCOT is required to provide notice as soon as practicable, but no later than ten days prior to implementation.
NPRR782<http://www.ercot.com/mktrules/issues/NPRR782> and NPRR840<http://www.ercot.com/mktrules/issues/NPRR840> and associated documents can be found on the ERCOT website.
CONTACT: If you have any questions, please contact your ERCOT Account Manager. You may also call the general ERCOT Client Services phone number at (512) 248-3900 or contact ERCOT Client Services via email at [log in to unmask]<mailto:[log in to unmask]>.
If you are receiving email from an ERCOT distribution list that you no longer wish to receive, please follow this link in order to unsubscribe from this list: http://lists.ercot.com.
sa
|